LiPo Battery For PARROT AR.DRONE 2.0 & 1.0 Quadricopter Lithium-Polymer 1500mAh 11.1V 20C

¥4,400
Combo Pack
Details

Replacement Drone Battery and Charger for PARROT AR.DRONE 2.0  and PARROT AR.DRONE 1.0 

11.1V 1500mAh 20C LiPo Battery for Parrot AR.Drone 2.0 Quadcopter
It come with hard case to better protect the battery
This battery can be charged using AR.Drone 2.0 charger
More longer flight time and fully plug and play !
Specification: 
Voltage: 11.1V
Capacity: 1500mAh
Discharge Rate: 20C
Weight: 101g

Charger is equipped with a Smart LED indicator to provide clear insight into charging status: Red indicates charging, while Green indicates the battery is charged. 

LiPo Battery offers no memory effect, allowing convenient and efficient charging at any time. An integrated microchip guards against overcharging, lengthening the battery life, while the high capacity ensures longer flying time. The lightweight and compact design provide an easy-to-use solution for your PARROT AR.DRONE 2.0 & 1.0 Quadcopter. Lithium-Polymer 1500mAh 11.1V 20C battery is 100% compatible with original manufacturer equipment.

    Features

    Battery Features:

    100% COMPATIBLE WITH: Very easy to install and remove. Fully compatible with Parrot AR. Drone 2.0, Parrot AR. Drone 1.0

    Extra 4 Pin cable for balance charger and battery meter: Battery can be charged with your Parrot AR. battery charger. You can also use your balance charger and battery meter/checker to check the status of your battery.

    The battery can be charged or discharged at any time. Please note to store the battery at half charged to extend the lifespan of your battery!

    High capacity 1500mAh 11.1V Lithium-ion polymer replacement battery allows you to fly for a long time.


    Charger Features:
    Equipped with Smart LED indicator to provide clear insight for charging status

    Charging status: Red = charging; Green = charged.

    Input of 100-240V 50/60Hz and an output of 12.6V ~ 3A

    100% compatible with original equipment manufacturer

    Product Care

    Note:

    Please understand that this is a very powerful long lasting battery and you must understand that by using such power, you are solely responsible for everything in the air and on the ground.


    Product Care Info:

    Don’t Run The Battery All the Way Down - Never deep drain a LiPo battery, as it can damage the poles and reduce life; instead, recharge when energy starts to slow down. Unless you have NiCd battery exhibiting the memory effect, avoid deep draining.

    Don’t Leave Battery on Charger - Remove battery after charging finishes; overcharging can damage it and shorten life. Not all chargers auto-shutoff.

    Don’t Let Battery Overheat - Heat is deadly for LiPos as it may cause them to explode; if hot, let cool before charging/using.

    Do Keep Battery Charged - Recharge cordless batteries as soon as you notice a decrease in power.

    Do Use Battery Regularly - Use batteries regularly; else, opt for a plug-in version.

    Do Charge Battery Completely: Be sure to leave the battery plugged in until it’s completely charged.

    Do Store Battery Properly: Store battery in original case or cushioned bag in cool, dry place away from sun, heat, or humidity. Use plastic cap to prevent short-circuiting and protect terminals from breakage and moisture.

    Specifications

    Battery Specifications:

    Battery Type: Lithium Polymer.
    Replaces Part #: For AR.Drone 2.0 HD Battery
    Capacity: 11.1v 1500mAh 20C
    Dimensions: 2.83" x 1.46" x 1.06" (inches)
    Weight: 4oz
    Quantity: 1
    SKU#1587


    Charger Specifications:

    For Battery Type: Lithium Polymer.
    100% Compatible with original manufacturer equipment.
    Input: 100-240V 50/60Hz
    Output: 12.6V ~ 3A
    Smart LED indicator shows charging status (Red = Charging / Green = Charged)
    Quantity: 1
    SKU#1600

    Warranty

    30-Day No Questions Asked Returns with USA-based Brand Warranty and Customer Service available. Please contact us if you have any questions or concerns!