5-in-1 Battery Charger for DJI Mavic 3 Cine Classic Pro Enterprise Drone - Rapid Multi Parallel Fast Charging Hub Accessories

Charger hub can charge batteries compatible with DJI MAVIC 3 series Intelligent Batteries and supports PD3.0 fast charging adapter for input. Equipped with charging mode for up to 3 batteries for efficient charging and discharging of your drone battery. Equipped with over-voltage, over-current, overheat, and overcharge protection. You can also charge the remote controller and smartphone with the extra USB ports of this charger hub, 

Compatible with DJI Mavic 3, Mavic 3 Classic, Mavic 3 Pro, Mavic 3 Cine, Mavic 3 Enterprise battery

 Download Instruction Manual here

NOTE:

Charging hub and charging cables only. Drone battery, smartphones and other accessories not included! 

Safety Upgrade - With safety switch, energy saving and environmental protection. Equipped with cooling fan and adjusts according to the charging temperature to effectively control charger temperature and avoid overheating

Compatibility - Compatible with DJI Mavic 3, Mavic 3 Classic, Mavic 3 Pro, Mavic 3 Cine, Mavic 3 Enterprise batteries

Intelligent Chip Control - Can charge 3 batteries simultaneously with dual USB charging, takes about 90 minutes to fully charge 3 batteries, Plug with cover prevents short circuit and dust coming into the cords

4A Current - More stable charging with overcurrent protection to protect battery from circuit busts, and overload protection to avoid wire softening. Output: DC 17.6V/12A (17.6V/4A per circuit)

Stable Charging - Over-voltage protection to avoid high voltage damage, Short circuit protection automatic powers off charger to prevent circuit from tripping and causing battery faulting

Time Saver Charger - You can put up to 3 batteries and charge them in order from high to low. High-powered batteries are charged first (not simultaneously)

ATTENTION:
1. Please place the charger on a stable surface when charging. Do not cover the charger. Ensure that there is sufficient heat dissipation.
2. When the battery level is higher than 90%, it may not charge automatically when connected.
3. Automated prohibition for charging when the used battery is very hot in a short time. The LED4 flashes for alarm. Charge the battery after it cools down to near room temperature.
4. The charger has a built-in fan to keep the charger good heat dissipation.
5. When the room temperature is lower than 7°C, battery will be protected and charging is prohibited. If the LED2 flashes, please place the battery charging in the environment of 8-40°C temperature.
6. It is forbidden to charge the battery with a damaged surface to avoid potential fire caused by a short circuit of the battery.
7. Incorrect use of the charger may result in electric shock.
8. The product is for indoor use only. Please not expose it to rain or snow.
9. Do not disassemble or assemble the charger.


NOTE:
Charging hub, power cord, and 3x charging cables only. Smartphone, remote controller and other non-drone charging cables not included!

Type: Drone Battery Charger
Temperature for charging: 7-40°C
Input: AC 100 – 240V
Output 1: DC 17.6V 4A*3 (211.2W)
Output 2: USB-A DC 5V3A
Charging Time: About 90 minutes
Certifications: Recycle, UK CA, CE, Do not Trash
MPN: DRC MAVIC 3-3C
SKU: 2140

30-Day No Questions Asked Returns with USA-based Brand Warranty and Customer Service available. Please contact us if you have any questions or concerns!