GIFI Balance Charger for Lithium-Polymer Battery for Yuneec Q500 Parrot Disco FPV

This charger offers safe and reliable charging of various Lithium-Polymer battery pin ports, ideal for users with multiple drone battery models that require recharging without risking short-circuiting.

Available Packs:

• With 7500mA battery for Yuneec Q500  
• With 4050mA battery for Parrot Disco FPV

DISCLAIMER:

• GIFI, Yuneec and Parrot brand mentions are for reference and demonstration purposes only. This product is an aftermarket item that's compatible with OEM/original equipment manufacturer parts. No copyright infringement intended.

BALANCE CHARGER - Charge your drone battery safely with this charger that can charge different battery pin ports; convenient to have when you have various drone battery models that needs recharging without short-circuiting

COMPATIBILITY - Equipped with 3 kinds of ports --- 3-pin, 4-pin and 5-pin; Compatible with OEM batteries like Yuneec 7500 mA and 4050mA Parrot drone batteries, plus more!

SHOWS CHARGING STATUS - Top left side of the charger shows the charging status of the battery with a blue LED light and the percentage tiers: 25% (start of charge), 50%, 75%, and 100% (fully charged)

PACKAGE INCLUDES - Includes 1x Balance charger, 1x Cable connector, 1x Power cord

How to Charge and Check Status:

Connect the cable to the 4-pin port of the battery slot.
Connect the other end of the cable to the charger port.
Plug in the power cable into the charger slot and use the AC plug to plug into a power outlet.
The charger should turn on, indicated by the nodes lightning up with a blue LED light.
Keep the charging status in check by observing when the charging status hit certain percentage tiers. Once it hits 100%, the battery should be fully charged.
After charging the battery, unplug the power cable and store the charger unit back into its box for safe storage.


Charging Status Info:

Top left side of the charger shows the charging status of the battery with a blue LED light and the percentage tiers:

25% - Start of charge
50%
75%
100% - Fully charged


Product Care Info:
Don’t Run The Battery All the Way Down - Never deep drain a LiPo battery, as it can damage the poles and reduce life; instead, recharge when energy starts to slow down. Unless you have NiCd battery exhibiting the memory effect, avoid deep draining.

Don’t Leave Battery on Charger - Remove battery after charging finishes; overcharging can damage it and shorten life. Not all chargers auto-shutoff.

Don’t Let Battery Overheat - Heat is deadly for LiPos as it may cause them to explode; if hot, let cool before charging/using.

Do Keep Battery Charged - Recharge cordless batteries as soon as you notice a decrease in power.

Do Use Battery Regularly - Use batteries regularly; else, opt for a plug-in version.

Do Charge Battery Completely: Be sure to leave the battery plugged in until it’s completely charged.

Do Store Battery Properly: Store battery in original case or cushioned bag in cool, dry place away from sun, heat, or humidity. Use plastic cap to prevent short-circuiting and protect terminals from breakage and moisture.

Type: Drone Battery Charger
Compatibility: Works with original manufacturer equipment for Yuneec Q500, Parrot Disco FPV and more
Input: 100-240V 50/60Hz
Output: 12.6V ~ 4A
Package includes: 1x Charger, 1x 4-Pin Cable Connector, 1x Power Cable
Item Dimensions:
Charger: 4.5 x 3 x 1.5"
Connector Cable: 4.95" (length)
Power Cable Plug: 45" (approx)
Box Dimensions: 5.5 x 4.95 x 1.65"
Weight: 10.2 oz
MPN: DRC YUN Q5001CHG
SKU: 2036

NOTE:
Accessories only. Battery not included unless buying the combo packs.

30-Day No Questions Asked Returns with USA-based Brand Warranty and Customer Service available. Please contact us if you have any questions or concerns!