Replacement Battery 4920 mAh Compatible for DJI Mavic WB37 Drone, Crystal Sky Monitor, Cendence Remote Controller

This 4920 mAh replacement battery is compatible with DJI Mavic WB37, Crystal Sky monitor, and the Cendence remote controller. It delivers outstanding discharge performance in low temperatures and charges rapidly. One battery can power a 7.85" Crystal Sky monitor for four to five hours, a 5.5" Crystal Sky monitor for five to six hours, and a Cendence remote controller for four hours.

  
With longer flight items, this battery will give you more freedom to capture scenic shots & videos for longer. Comes with safety battery functions like overcharge, overcurrent, and overvoltage protection

Buy one or more for an absolutely power-packed flight and save time and energy from having to constantly recharge just one battery 

Rechargeable Li-Po Battery is designed to be compatible for DJI Mavic WB37 Drone, Crystal Sky monitors, Cendence remote controller, and works well with original OEM charger

One battery powers a 7.85" Crystal Sky monitor for four to five hours, a 5.5" Crystal Sky monitor for five to six hours, and a Cendence remote controller for four hours (depends on different factor like speed, windy weather, temperature, charging time and so on)

Adds minutes of flight time on a single charge compared to the original battery of your drone thanks to intelligent flight battery power (depends on different factor like speed, windy weather, temperature, charging time and so on) - more overhead and scenic landscape views for your viewing and photoshoots (actual time may vary depending on factors influencing flight)

Integrated microchip prevents overcharging and lengthens battery life, powered by lithium polymer at 7.6V Lipo Battery 4920mAh 37.39Wh LiPo capacity

With the built-in 4 LED indicator lights can show the battery power and charge status, with the touch of a button. Absolutely no memory effect so that you can charge battery at anytime

Don’t Run The Battery All the Way Down - Never deep drain a LiPo battery, as it can damage the poles and reduce life; instead, recharge when energy starts to slow down. Unless you have NiCd battery exhibiting the memory effect, avoid deep draining.

Don’t Leave Battery on Charger - Remove battery after charging finishes; overcharging can damage it and shorten life. Not all chargers auto-shutoff.

Don’t Let Battery Overheat - Heat is deadly for LiPos as it may cause them to explode; if hot, let cool before charging/using.

Do Keep Battery Charged - Recharge cordless batteries as soon as you notice a decrease in power.

Do Use Battery Regularly - Use batteries regularly; else, opt for a plug-in version.

Do Charge Battery Completely: Be sure to leave the battery plugged in until it’s completely charged.

Do Store Battery Properly: Store battery in original case or cushioned bag in cool, dry place away from sun, heat, or humidity. Use plastic cap to prevent short-circuiting and protect terminals from breakage and moisture.


NOTES:
Only use DJI approved charging devices

Never put battery into a fire or disassemble, puncture, drop, crash, or short-circuit the battery

Do not use water-damaged batteries

Compatible with for DJI Mavic WB37 Drone, Crystal Sky monitors, Cendence remote controller
Model No: WB37-4920mAh-7.6V
Max Charge Voltage: 8.7V
Nominal Voltage: 7.6V
Rated Capacity: 4920mAh, 37.39Wh
Item Dimensions: 3.55 x 1.75 x 1.05"
Package Dimensions: 5 x 3.2 x 1.8"
Weight: 7.1 oz
MPN: DRB WB37 4920MA
SKU: 2177

-Power On and Off-
Press once and hold the power button for 2 seconds to power on and power off the battery

NOTES:
Battery only! Drone not included.
Battery comes 70% charge/storage mode

30-Day No Questions Asked Returns with USA-based Brand Warranty and Customer Service available. Please contact us if you have any questions or concerns!